Free Construction Tool
Calculate exact brick quantity, mortar bags, and estimated cost for any wall. Used by builders + engineers across Lahore, Islamabad, and Rawalpindi.
Enter your wall dimensions to calculate exact brick quantity
You'll Need
bricks for your wall
Note: Calculations based on standard Pakistani brick (9" × 4.5" × 3"). Cost range based on A-grade brick prices Rs 18-25 per brick (2026 rates). Final quantity may vary by ±5% based on actual wall design + cutting wastage. Get exact BOQ from Sunshine Contractors for precision.
Use this quick reference to verify the calculator output or estimate manually.
| Wall Type | Thickness | Bricks per Square Foot |
|---|---|---|
| Single Brick (Interior) | 4.5" | 5.5 bricks/sq ft |
| Double Brick (Standard Exterior) | 9" | 11 bricks/sq ft |
| Triple Brick (Boundary Wall) | 13.5" | 16.5 bricks/sq ft |
Our calculator uses the standard Pakistani modular brick: 9" × 4.5" × 3" (length × width × height). This is the most commonly available brick size across Lahore, Islamabad, Rawalpindi, and Multan.
Current market rates as of June 2026:
| Brick Grade | Price per 1000 Bricks (PKR) | Best Used For |
|---|---|---|
| A-Grade (Premium) | Rs 22,000 — 25,000 | Exterior + load-bearing walls |
| B-Grade (Standard) | Rs 18,000 — 22,000 | Interior + general construction |
| C-Grade (Economy) | Rs 14,000 — 18,000 | Boundary walls + non-critical |
| Fly Ash Bricks | Rs 16,000 — 20,000 | Eco-friendly construction |
| Hand-Made Bricks (Heritage) | Rs 25,000+ | Heritage restoration + premium projects |
Note: Prices vary by city, supplier, and bulk order quantity. For accurate pricing, get a quote from Sunshine Contractors.
Standard mortar ratio for brickwork in Pakistan: 1:6 (cement:sand).
For every 1000 bricks, you'll typically need:
Our calculator automatically estimates these quantities based on your wall size.
Mixing bricks from different kilns leads to color and size variation, increasing visible wastage.
Stack bricks on flat ground, covered from rain. Wet bricks during construction reduces moisture absorption from mortar.
Experienced masons waste fewer bricks during cutting and ensure precise joints.
Door + window placement affects cutting waste. A well-planned design minimizes broken bricks.
Pakistani bricks should be soaked 1-2 hours before laying. Dry bricks absorb water from mortar, weakening bonds.
Standard wastage allowance. Better to have a few extra than run out mid-construction.
Broken halves and quarters can be used in cutting points instead of fresh bricks.
For a 1000 sq ft house with 9" exterior walls (~1000 sq ft of walls), you'll need approximately 11,000 bricks. Interior walls add another 3,000-5,000 bricks. Total: 14,000-16,000 bricks for a standard 1000 sq ft house. Use our calculator for exact numbers based on your wall layout.
4.5" walls are single-brick walls used for interior partitions — not strong enough for load-bearing. 9" walls are double-brick walls used for standard exterior construction — load-bearing in most Pakistani homes. 13.5" walls are triple-brick walls used for boundary walls and high-load applications like compound walls.
A-grade bricks in Lahore (June 2026): Rs 22,000 — 25,000 per 1000 bricks. B-grade: Rs 18,000 — 22,000. Prices fluctuate seasonally and by kiln. Always get quotes from multiple suppliers and verify quality before bulk purchase.
Yes, fly ash bricks are an eco-friendly alternative. They're slightly lighter and more uniform than clay bricks. Cost: Rs 16,000 — 20,000 per 1000. Best for load-bearing walls and projects where consistency matters. Note that our calculator's quantity estimates work for both — only adjust the price.
For standard 1:6 cement-sand mortar: approximately 2 bags of cement (50kg each) and 10 cubic feet of sand per 1000 bricks. Add 10% wastage for safety. Our calculator estimates this automatically.
Standard Pakistani modular brick: 9" × 4.5" × 3" (length × width × height). This differs from international standard bricks. Some manufacturers also produce smaller modular bricks (7.5" × 3.5" × 2.25"), but these are less common. Always confirm with your supplier.
Our calculator provides ±5% accuracy for straight rectangular walls. For complex designs (arches, curves, multiple openings), actual quantity may vary slightly. Always add 5-10% wastage and consult a site engineer for precise BOQ. For exact calculations on your specific project, contact Sunshine Contractors.
Major brick suppliers operate kilns on the outskirts of all three cities. Most reputable kilns offer bulk delivery. For verified suppliers and quality assurance, Sunshine Contractors maintains a network of trusted kilns and can source bricks at competitive bulk rates for projects we manage.
Get a complete construction quote with detailed BOQ, material brand specifications, labour costs, and timeline from Pakistan's trusted construction company.
